[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
home made camera housing
- To: <ukha_d@xxxxxxx>
- Subject: home made camera housing
- From: "Paul Gale" <groups@xxxxxxx>
- Date: Mon, 1 Dec 2003 10:55:49 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I=92ve got a Sony block camera and want to modify a cheap pan and tilt
modu=
le I bought from Milford Instruments - http://www.milinst.com/gemodules/5_=
130.pdf
I need some kind of housing for the camera (box measuring something like
10=
0mm Long x 60mm wide x 50/60mm Deep). I=92ll then mount an axis rod either
=
side of it so that the camera can tilt through it=92s centre of gravity
(an=
d I=92ll hopefully get a smooth tilt action).
I=92ve looked at RS and Maplins for a suitable plastic enclosure but not
fo=
und anything suitable at the right size. I guess I could use an extruded
pl=
astic box section and fit end caps? Anyone know of suppliers for
something=
suitable?
Thanks,
Paul.
Home |
Main Index |
Thread Index
|