The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: [OT] : Help SMS


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Loftbox users?



I've just done exactly that (LNB1 via the loftbox, LNB2 direct). The
picture's fine, but I am getting some sound breakup, compared to if I
have the Sky+ box connected direct to LNB1. It's a hell of a long run,
though (around 25 metres of cable from dish to loftbox and at least as
much again from loftbox to intended location in living room), so it may
be that which causes the problem. Is there any such thing as a booster
for digital, that I could add to the line from the loftbox to the living
room?

And as for distribution of the terrestrial signal - it's not that great
in my area to start with, but by the time it's covered that distance via
the loftbox, it's either hopelessly degraded or so weak that the TV
can't autotune to it at all (at least that's the only reason I can think
of why I don't seem to get any signal at all in some of the rooms). I
need to figure out a solution for that.

Cheers,

Bruno


Paul Gordon wrote:
>>Mines' under the floor Paul, no problems and its been there for 2
years. As
>>you say though, useless for Sky+.
>>
>>K.
>
>
> Well, not entire "useless" I hope?... I am presuming that I
will still put
> the LNB1 feed through the loftbox in the intended manner, and this
won't
> affect the operation of sky+ in any way... It's just that because the
+ box
> has 2nd LNB feed that the loftbox won't touch with a long sh*tty
stick, I'll
> just have to take that 2nd feed straight to the sky+ box, as I would
> normally do anyway...
>
> That's my intention at least...
>
> Paul G.



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.