The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: low energy bulbs and x-10



Hi Stephen,

> I was most interested in using the bayonet appliances, so that I could
> control the bulbs in my existing fittings. I looked at those sites you
> recommended, but they said that the bayonet appliances were for
> incandescent bulbs only. Why is this, the bayonet appliance only has
> an on/off function, there is no dimming? I didn't really want to use
> appliance modules and table lamps! Is there no other way around this?
> All the lights in my house are the low energy light bulbs.

Take a look at:
http://www.marmitek.com/eng_site/base_nl/product.asp?taal=3&subgroep=5

<QUOTE>
A Bayonet or screw-in Lamp Module (LM15). You
can put this Lamp Module directly into the lamp
socket. Can also be used with low-energy
lamps. It is not possible to dim with this Lamp
Module.
</QUOTE>

So I'm not entirely sure who is correct on this one, although I have used a low energy bulb in an LM15 during testing with no problems.
You would expect Marmitek to know what they're talking about - hopefully :-)

Remember though that you will have no local control of your bulbs, so the light switch will need to be left switched on, and you will have to control your lights entirely by X10.

> Perhaps it is no great loss. The bayonet fittings don't have the dials
> so that you can set individual appliance and house codes, so perhaps
> they would be a pain to use. Has anyone had any experience with them?

Not really a problem - you simply send the X10 code you want the module to use 3 times within the first 30 seconds of applying power to the module. After this point it will remember the chosen code, even after a power cut.

HTH,

John


Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.