Hi Shane
Sounds interesting........ Could it be controlled by
Homevision or Keiths KAT5 Switcher???? I would be interested
definetly..........
Frank Mc
----- Original Message -----
From: "Shane Harrison" <shane.harrison@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Wednesday, July 10, 2002 2:04 AM
Subject: [ukha_d] Audio Amplifiers DIY
> Hi there,
>
> Question for the Ians, Frank, Keith types out there in HA land.
>
> Intention is to distribute whole house audio speaker outputs from node
0
> (after considering all options). I have had a 4 channel
amplifier design
> with digital volume control sitting around for awhile. About to
lay it
out.
> As some might remember I intend using Linet network for control.
>
> I already intend having a 16C620A PIC device on the card so I thought,
hey
> ... that has the same pinout as the 16F628 you xAP guys have been
raving
> about. The card is designed to plug into an edge connector (rack
mounted),
> why not run (in addition to the Linet control lines) a serial
connection
to
> the edge connector. Would mean substituting the 16C620A with a
16F628 and
> using Maxim chips give RS232 or RS485 output to the edge connector.
It
might
> then be slightly useful to someone else - you never know.
>
> Now the questions.
> 1) Anyone actually interested ?
> 2) RS232 or RS485 ?
>
> Depending on the answers I'll send another email requesting some
design
> clarifications for 2) !
>
> Note at this stage I would only be implementing hardware support as
I
don't
> personally need the serial connections.
>
> Cheers
> Shane
>
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Comments to the Webmaster are always welcomed, please use
this contact form
. Note that as this site is a mailing list archive, the Webmaster has no control
over the contents of the messages. Comments about message content should be directed
to the relevant mailing list.