The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Automated Oven?!

From: "Kenneth Watt" <kwatt@xxxxxxx>
> > Freestanding.
>
> Okay, the best I can suggest is to put a Dallas stat inside the steam
> vent at the back mounted so it measures the air temp, not the casing!
> There should be one on a freestander and chart the temp through a
> heat-up/cool-down and then program the controller to respond to what you
> discover is the minimum to mean that the temp is safe and the whatnot
> and program what you want based on that info.

Good plan.

> Obviously a *LOT* easier with HV! ;)

:-)

Cheers,
Andy
--
Free Wireless Internet?
http://consume.andylaurence.co.uk - updated today
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home | Main Index | Thread Index
Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.