The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Lighting Control



If you can afford it hard wired is better, talk to Tim as he did a lot
of research on this just recently.

K.

> -----Original Message-----
> From: Rob Mouser [mailto:rmouser@xxxxxxx]
> Sent: 24 May 2002 09:41
> To: Ukha (E-mail)
> Subject: [ukha_d] Lighting Control
>
> Dear All
>
> Well I've finally got my whole house audio sorted for the new barn, so
> now its on to Project 'B' - Lighting. the problem is I'm a little torn
> between which way to go?
>
> I've got a few options, the barn has been wired with two system
> circuits, the main lighting circuit is on a standard system but to aid
> the automation process I've had neutral feeds placed back to every
> switch. Secondly I have various runs of cable that  feed various zones
> all coming back to a dedicated consumer unit so I can use X10 Din Rail
> modules or a dedicated lighting system such as Lutron or Polaron.
>
> So which way do I go? Lutron style zoned dimming control or X10 or a
> combination of the both? The majority of all automation control is via
> Xantech IR receivers placed in each room. I have to say I'm a bit put
> off by X10 because of the negative posts I've seen regarding stray
> signals, erratic behaviour, fuse blowing etc?
>
> What are peoples comments, suggestions, recommendations?
>
> Also as a side; Lutron units use something called Pelv wiring for
> controller linking. Is Shielded CAT5, to the Pelv standard? Also what
is
> the safe voltage CAT5 can take, for relay switching etc (Curtain
control
> etc)?
>
> Thanks
>
> Rob
>
> ------------------------ Yahoo! Groups Sponsor
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>




Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.