Re: Freezer Alarm

["PatrickLidstone" <patrickl@xxxxxxx>]

--- In ukha_d@y..., "Kenneth Watt" <kennwatt@b...>
wrote:
> What you could get away with then, although not pretty, is to use 
some
> short self-tappers into the outer skin of the door at the opening 
side
> and the bit of the outer cabinet that meets it with brackets to 
mount a
> microswitch. 

I'd use epoxy glue rather than screws to mount the microswitch, make 
sure surfaces are clean/keyed before fixing.

You might also want to consider using a reed switch (of the type used 
for burglar alarms), with switch mounted on cabinet and magnet 
mounted on door frame - again using epoxy glue.

Patrick

Yahoo! Groups Sponsor

ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.