The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Re: ADSL filters


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Orange SmartHome Sunday Times Article


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Orange SmartHome Sunday Times Article
  • From: "Ian Lowe" <ian@xxxxxxx>
  • Date: Sun, 12 May 2002 17:20:52 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

One problem perhaps Keith: the water coming down the plughole is grey water,
ful of grease, slime, detergent, etc etc etc..

Would a valve be able to live in that environment for a decent amount of
time?

Also, given that almost all waste water (not, erm, "solids") outfall is on
20mm tubing, could you get a motorised 20mm valve?

Ian.

-----Original Message-----
From: Keith Doxey [mailto:lists.diyha@xxxxxxx]
Sent: 12 May 2002 11:55
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] Orange SmartHome Sunday Times Article


I've thought about this......

How about....

NO PLUG. but a valve below the bath that controls the outlet.
Above that between the bath and plug hole there is a T piece where you
connect a tube that rises vertically behind the bath similar to the level
guage on an oil tank. The sensor can be on that to detect the level.

I havent actually built that design but I see no reason why it wouldnt work.

(PS. you could use a siteplayer to monitor it via the web :-))
Keith
www.diyha.co.uk
www.kat5.tv
-----Original Message-----
From: Kevin Hawkins [mailto:lists@xxxxxxx]
Sent: 12 May 2002 10:38
To: UKHA Group
Subject: [ukha_d] Orange SmartHome Sunday Times Article


    The Business section (p13) of the Sunday Times has an article about the
Orange Smart Home. It concludes, not too positively, that SWMBO is probably
right when she wants light switches rather than touch screens ! Overall AV
came out as desirable and a smart bath, the plug stays 'up' until the water
flow is at the right temp - and you can't overflow it.

    I must admit the latter has happened here and just after redecorating
downstairs. Anyone got any good 'water level' detection ideas ? - I think
most of them need a hole in the bath to an outside pipe although maybe you
could dispense with the plug , fit an electric valve instead and tap off
before it for the level sensor... hmmm got me thinking now..

    Kevin




Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.