The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Power Cuts


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Power Cuts
  • From: "Anthony Livingstone" <anto@xxxxxxx>
  • Date: Sun, 9 Jun 2002 02:45:19 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Title: Message
For home UPS protection I would look at the APC Back-Ups CS 500 : http://www.apcc.com/products/back-ups_cs/index.cfm#specs
This should do the job nicely supplying three battery backup power outlets, an additional surge protected power outlet and also surge protection for your phone / ADSL line, USB connectivity to your PC and insurance it would seem!
When you compare the price to some of the 4 way surge protectors out there it seems good value!
 
The PowerChute software can be set to send an email to your mobile phone to inform you of a power outage and can then perform an Auto Reboot after mains power is resumed or when the battery recharges to a set level Assuming your bios supports it as Ian has said).
 
In fact, I've just convinced myself I need one and will order one now as they only have 5 left at Dabs.  :o)
 
Anto.
 
 -----Original Message-----
From: Ian B [mailto:Ian@xxxxxxx]
Sent: 09 June 2002 00:36
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] Power Cuts

My UPS (serial connection) is set to power down the server when the battery gets low. I have never had cause to try this next bit when connected to the UPS as it lasts nearly 3 hours but - the PC BIOS can be set to power up the PC on connection of the mains. I use this for X10 control of another PC as well. Remote on and off (off after shut down via remote control of course).
 
HTH
 
Ian
-----Original Message-----
From: Rowdy [mailto:aoop43@xxxxxxx]
Sent: 09 June 2002 00:22
To: ukha_d@xxxxxxxSubject: [ukha_d] Power Cuts

Having just built myself a server to sit in the garage and run homeseer, been away for a few days to find we've had a powercut and the machine was off, doh. I assume to shutdown properly when we get a powercut it's simply a case of a UPS. My question is what is the safest way to get the machine to restart when the power is resumed. I assume this would not be a feature of the UPS.
 
Thanks,
 
Keith

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.