----- Original Message -----
Sent: Sunday, June 09, 2002 12:35
AM
Subject: RE: [ukha_d] Power Cuts
My
UPS (serial connection) is set to power down the server when the battery
gets low. I have never had cause to try this next bit when connected to the
UPS as it lasts nearly 3 hours but - the PC BIOS can be set to power up the
PC on connection of the mains. I use this for X10 control of another PC as
well. Remote on and off (off after shut down via remote control of
course).
HTH
Ian
Having just built myself a server to sit in
the garage and run homeseer, been away for a few days to find we've had a
powercut and the machine was off, doh. I assume to shutdown properly when
we get a powercut it's simply a case of a UPS. My question is what is the
safest way to get the machine to restart when the power is resumed. I
assume this would not be a feature of the UPS.
Thanks,
Keith
For more
information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.