The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tivo force software upgrade


  • To: <ukha_d@xxxxxxx>
  • Subject: Re: Tivo force software upgrade
  • From: "Neil F" <automated@xxxxxxx>
  • Date: Tue, 26 Feb 2002 22:35:09 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • References: <200202262220.g1QMKho25870@xxxxxxx>
  • Reply-to: ukha_d@xxxxxxx


> Have you tried forcing the daily call again, now it thinks it's
uptodae
> with the EPG ?

Just trying again..
>
> As for the sound warble, what is the third part of your serial number
>
> i.e.
>
> 023-0000-xxxx-yyyy
>
> the xxxx bit, if it's 6022 or above then the software upgrade should
> sortout any of the nicam warble problems, if it's below i.e 601F
etc...
> then the hardware may have a problem which I believe Tivo will sort
out.

hmmm.. 601F :(
>
> Bear in mind the nicam warble problems ONLY affect the RF record NOT
> recording with the SCART.

I'm getting warble on ITVdig channels. I need to play with it more
though..It might just be me messing about with pause and rewind on live TV
too much
>
> All this information comes from the Tivo Forum at
www.tivocommunity.com,
> not from my experience.
>
> Darren
Thanks for the advice Darren...I'll have a good read of that site in work
tomorrow

Neil




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.