[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Tivo force software upgrade
- To: ukha_d@xxxxxxx
- Subject: RE: Tivo force software upgrade
- From: Mike Griffiths <mike@xxxxxxx>
- Date: Tue, 26 Feb 2002 22:40:10 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
V1.5.1 has sound warble
Plus if my memory serves me correctly NO RGB
Welcome to the world of no Adverts
By the way over on http://www.tivocommunity.com
Uk forum there is a guy with 13 TiVo's
Yes that was 13
Just some food for thought
:)
Mike
At Home
-----Original Message-----
From: Neil F [mailto:automated@xxxxxxx]
Sent: Tue 26 Feb 2002 22:35
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Tivo force software upgrade
> Have you tried forcing the daily call again, now it thinks it's
uptodae
> with the EPG ?
Just trying again..
>
> As for the sound warble, what is the third part of your serial number
>
> i.e.
>
> 023-0000-xxxx-yyyy
>
> the xxxx bit, if it's 6022 or above then the software upgrade should
> sortout any of the nicam warble problems, if it's below i.e 601F
etc...
> then the hardware may have a problem which I believe Tivo will sort
out.
hmmm.. 601F :(
>
> Bear in mind the nicam warble problems ONLY affect the RF record NOT
> recording with the SCART.
I'm getting warble on ITVdig channels. I need to play with it more
though..It might just be me messing about with pause and rewind on live TV
too much
>
> All this information comes from the Tivo Forum at
www.tivocommunity.com,
> not from my experience.
>
> Darren
Thanks for the advice Darren...I'll have a good read of that site in work
tomorrow
Neil
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|