Re: AWM2 2-way wiring problem

["garygfx" <garygfx@xxxxxxx>]

Jon,
Good idea, I'll just not connect the 2nd input! I wasn't sure why 
this other input was needed?

The DIN modules were way too big to put into plaster boards (I can't 
run any more special wires, I have to make do with existing wiring) 
and don't I need a DIN rail to mount them on?

Cheers,
Gary.


--- In ukha_d@y..., "Jon Whiten" <jon@w...> wrote:
> If you do not need the second input, just ignore it (don't connect
it).  End
> of problem?  In fact, your comment "Am I missing the reason
why it 
has to
> transmit any X10 code at all?" suggests that you only wish to
connect a
> switch that switches the unit on/off.  Failing that, you could
re-
arrange
> your numbers to accommodate the AWM2s.
> 
> Sounds like you really wanted the DIN modules (AD10s) that would 
work as you
> describe - were the DIN modules just too large?
> 
> Regards,
> 
> Jon
> http://www.whiten.co.uk/
> 
> 
> 
> > -----Original Message-----
> > From: garygfx [mailto:garygfx@d...]
> > Sent: 04 August 2002 19:43
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] Re: AWM2 2-way wiring problem
> >
> 
> > The other thing I don't understand about the AWM2 is why it has
to
> > utilise the next unit code? I want to use A1-A8 for
downstairs
> > lighting but 4x AWM2s take up all of those 8 codes instead of
just 4
> > codes. Am I missing the reason why it has to transmit any X10
code at
> > all?
> >
> > Thanks,
> > Gary.
> >

Yahoo! Groups Sponsor

ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.