The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ukha_d) UPS



Yep, I need a bigger, more intelligent UPS!  The one I'm using can be demoted to
the TiVo, so that's no problem.  I know it's been posted a gazillion times
before, but can someone point me in the direction of a cheap UPS supplier?

Thanks

Pete

-----Original Message-----
From: MIME:nikola@xxxxxxx at INTERNET
Sent: 19 August 2002 13:46
To: White, Peter; ukha_d@xxxxxxx at Internet
Subject: RE: [ukha_d] RE: (ukha_d) UPS


Peter,
UPS is usually connected to PC via serial (non-standard) cable. At least
mine is (APC). It can then pass details about power to PC (about battery,
logs etc.). There is a software, Powerchute, (which I don't use) which
starts shutting down windows properly after configured period of time, to
prevent crash when battery dries out.
I have Win2000, so I don't know about XP.
On my UPS, I have five leds which indicate how much UPS is loaded. I have
700VA UPS and connected server, network switch, ADSL modem, and possibly few
more little devices. My UPS has 4 sockets and I connected power strip on one
of them. Still it's showing that it's loaded less then 20%. I don't have
monitor there.
I think that mine can last more than 15 min on batteries, and because I
never had such a long outage, I never bothered installing PowerChute.
My UPS serves me as a voltage regulator as well, because it shows me that in
70% of the time it's cutting voltage because it's too high. Strange, because
I'm in London, in a new building and I asumed that power supply should be
stable and within the specs.
Hope this gives you some idea.
Nik
-----Original Message-----
From: peter.white@xxxxxxx [mailto:peter.white@xxxxxxx]
Sent: 19 August 2002 11:13
To: ukha_d@xxxxxxx Subject: [ukha_d] RE: (ukha_d) UPS


It is up to date, but that wouldn't make any difference - the UPS isn't
very
clever - it's not connected to the PC in any way (other than power).

Pete

-----Original Message-----
From: MIME:mafiu@xxxxxxx at INTERNET
To: White, Peter; ukha_d@xxxxxxx at Internet
Sent: 19/08/02 10:52
Subject: RE: [ukha_d] UPS

Didnt one of the critical updates fix a bug that made XP crash when
connected
to a UPS?

Its just a vauge memory I have - Is your installation fully up to date
from
windowsupdate.microsoft.com?

Matthew

----- Original Message -----
From: Ray Barnett
To: ukha_d@xxxxxxx Sent: Monday, August 19, 2002 10:08 AM
Subject: RE: [ukha_d] UPS


IME on XP, IRQ_NOT_LESS_THAN_EQUAL means a device driver has blown up.
That
could either be the UPS driver having a fit, or a driver for one of the
USB
devices getting upset when the USB devices power off. Best way to find
out is
to unplug everything and test powering off.

Ray.
-----Original Message-----
From: Stuart Grimshaw [mailto:stuart@xxxxxxx]
Sent: 19 August 2002 10:02
To: ukha_d@xxxxxxx Subject: Re: [ukha_d] UPS


On Monday 19 Aug 2002 9:30 am, peter.white@xxxxxxx wrote:
> IRQ_NOT_LESS_THAN_EQUAL  plus a bunch of other stuff that vanished

before I
> could read it.  So I'm assuming that the sudden removal of
multiple USB
and
> LAN devices has caused XP to crash out.

Could this be a conflict of IRQ's? Not an XP expert but it sounds
like
something wrong along those lines. Perhaps the UPS is trying to fire
off
an
IRQ events to tell the system that the powers gone, but it
conflicting
with
something?

Just a stab in the dark (excuse the pun).


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.