[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Fwd: [1-wire] 1-Wire LCD.
- To: ukha_d <ukha_d@xxxxxxx>
- Subject: RE: Fwd: [1-wire] 1-Wire LCD.
- From: Keith Doxey <ukha@xxxxxxx>
- Date: Thu, 6 Sep 2001 13:39:31 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
DEFINATELY :-))
Keith
-----Original Message-----
From: Stuart Grimshaw [mailto:stuart@xxxxxxx]
Sent: 06 September 2001 13:16
To: ukha_d@xxxxxxx
Subject: [ukha_d] Fwd: [1-wire] 1-Wire LCD.
This is from the 1-wire mailing list. A 1-wire LCD interface with 3 gpio
pins
& 1 input only pin.
Keith, I guess this has got you interested huh :-)
I've got a data sheet from the manufacturer which I am going to put in the
files sections on Yahoo....
---------- Forwarded Message ----------
I have developed a 1-Wire Liquid Crystal Display (LCD) controller.
This 1-Wire LCD controller connects a standard Liquid Crystal
character display to the 1-Wire network. The network master can
then control this LCD in the same manner as any other 1-Wire
slave device.
The 1-Wire LCD controller has the following built-in functionality:
1) Unique serial number.
2) Support for a wide range of LCDs, from 1 Line x 8 Characters
up to 2 Line x 40 Characters.
3) Built-in LCD initialize: to ensure that the LCD is ready to
display text after power-up.
4) Easy text displaying via scratchpad.
5) Direct LCD register and data memory access to enable full
control of the LCD.
6) LCD power ON/OFF control.
7) 3 Open collector general-purpose input/output pins (GPIO)
and 1 general-purpose input only pin (GPI).
8) All inputs have de-bounced (50mS) event counters
(counts up and down going events).
9) Open collector outputs can sink 10mA of current
(direct LED drive with internal 470-Ohm resistor).
10) 112 x 8 bytes of EEPROM (Non-volatile storage).
Interested? For more information contact me at
mailto:louiss@xxxxxxx (Please use the
SUBJECT "1-Wire LCD").
Thank you,
Louis.
_______________________________________________
1-wire-software-development mailing list
1-wire-software-development@xxxxxxx
To UNSUBSCRIBE, edit your profile, or visit the list archives, go to:
http://lists.dalsemi.com/mailman/listinfo/1-wire-software-development
-------------------------------------------------------
--
Stuart Grimshaw <stuart@xxxxxxx>
-
t:07976 625221
f:0870 7060260
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|