The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Fwd: [1-wire] 1-Wire LCD.


  • To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
  • Subject: RE: Fwd: [1-wire] 1-Wire LCD.
  • From: Andy Brockhurst <a.brockhurst@xxxxxxx>
  • Date: Thu, 6 Sep 2001 13:31:49 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Okay, okay newbie alert :-)

What's all this one wire network stuff and where can I found out about it.

Andy

---
Andrew Brockhurst
Senior New Media Developer
Tableau Group
a.brockhurst@xxxxxxx
www.tableaugroup.com
Tel: 01920 876537


-----Original Message-----
From: Stuart Grimshaw [mailto:stuart@xxxxxxx]
Sent: 06 September 2001 13:16
To: ukha_d@xxxxxxx
Subject: [ukha_d] Fwd: [1-wire] 1-Wire LCD.


This is from the 1-wire mailing list. A 1-wire LCD interface with 3 gpio
pins
& 1 input only pin.

Keith, I guess this has got you interested huh :-)

I've got a data sheet from the manufacturer which I am going to put in the
files sections on Yahoo....

----------  Forwarded Message  ----------

I have developed a 1-Wire Liquid Crystal Display (LCD) controller.
This 1-Wire LCD controller connects a standard Liquid Crystal
character display to the 1-Wire network. The network master can
then control this LCD in the same manner as any other 1-Wire
slave device.

The 1-Wire LCD controller has the following built-in functionality:

1) Unique serial number.

2) Support for a wide range of LCDs, from 1 Line x 8 Characters
up to 2 Line x 40 Characters.

3) Built-in LCD initialize: to ensure that the LCD is ready to
display text after power-up.

4) Easy text displaying via scratchpad.

5) Direct LCD register and data memory access to enable full
control of the LCD.

6) LCD power ON/OFF control.

7) 3 Open collector general-purpose input/output pins (GPIO)
and 1 general-purpose input only pin (GPI).

8) All inputs have de-bounced (50mS) event counters
(counts up and down going events).

9) Open collector outputs can sink 10mA of current
(direct LED drive with internal 470-Ohm resistor).

10) 112 x 8 bytes of EEPROM (Non-volatile storage).


Interested? For more information contact me at
mailto:louiss@xxxxxxx (Please use the
SUBJECT "1-Wire LCD").

Thank you,
Louis.

_______________________________________________
1-wire-software-development mailing list
1-wire-software-development@xxxxxxx
To UNSUBSCRIBE, edit your profile, or visit the list archives, go to:
http://lists.dalsemi.com/mailman/listinfo/1-wire-software-development

-------------------------------------------------------

--

Stuart Grimshaw <stuart@xxxxxxx>
-
t:07976 625221
f:0870 7060260


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

This message is confidential and for the intended recipient only. If you
are
not the addressee indicated in the message (or responsible for the delivery
of the message to such person), you may not copy or deliver this message to
anyone. If you have received this email in error please notify the Tableau
originator. We scan for viruses but take no responsibility for the presence
of any viruses in this e-mail. Opinions, conclusions and other information
in this message that do not relate to the official business of Tableau
shall
be understood as neither given nor endorsed by them.


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.