[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: X10 Fan speed control
- To: <ukha_d@xxxxxxx>
- Subject: RE: X10 Fan speed control
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Sat, 12 May 2001 10:30:28 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
OK ... so time to look into some form of X10 mod to fake using the
switching
that's there already.
Phil
> -----Original Message-----
> From: K. C. Li [mailto:li@xxxxxxx]
> Sent: 12 May 2001 10:16
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] X10 Fan speed control
>
>
> > OK ... Sounds like a good enough reason to haul out the toys from
under
> > Edwards bed and try to "borrow" the lamp module that
his
> bedside light is
> > using at the moment.
>
> I would advise against doing it. Motor loads usually do not like the
> altered sine wave that dimmer modules put out, even at 100%
brightness.
> The motor under control is liable to heat up and, in some case, burn
out.
>
> Regards,
>
> Kwong Li
> li@xxxxxxx
> Laser Business Systems Ltd.
> http://www.laser.com
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|