The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: X10 Fan speed control


  • To: ukha_d@xxxxxxx
  • Subject: RE: X10 Fan speed control
  • From: "K. C. Li" <li@xxxxxxx>
  • Date: Sat, 12 May 2001 10:15:43 +0100 (BST)
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

> OK ... Sounds like a good enough reason to haul out the toys from
under
> Edwards bed and try to "borrow" the lamp module that his
bedside light is
> using at the moment.

I would advise against doing it. Motor loads usually do not like the
altered sine wave that dimmer modules put out, even at 100% brightness.
The motor under control is liable to heat up and, in some case, burn out.

Regards,

Kwong Li
li@xxxxxxx
Laser Business Systems Ltd.
http://www.laser.com





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.