The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Coax Cable


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Coax Cable
  • From: "Dr John Tankard" <john@xxxxxxx>
  • Date: Fri, 4 May 2001 19:11:14 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

> You should be using CT100 as a minimum I'd suggest and not
> the old brown
> stuff.
>
Dito.

You could also consider using Keiths KAT5's, I used CT125 but it is getting
a bit thick but the loss is much less than CT100, But CT100 is considerably
better than bog standard down feed cable.

John




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.