The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: UKHA Sourceforge Group


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: VB control of CM12A


  • To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
  • Subject: RE: VB control of CM12A
  • From: "Brown, Andy [Infrastructure]" <andyb@xxxxxxx>
  • Date: Mon, 30 Apr 2001 11:37:53 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Andy - ActiveHome works fine, no problems.

I'll have to double check the X10 comms have shutdown before using keware
ocx.

I'm using Win2k.

Cheers

Andy

-----Original Message-----
From: Andy Powell [mailto:Andy@xxxxxxx]
Sent: 30 April 2001 11:08
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] VB control of CM12A



the OCX from Keware should work with no trouble at all. Does it work with
ActiveHome? Have you shutdown the Activehome X10 comms before you tried to
us the keware ocx?

If you are getting nothing then is your serial port ok? What's your OS? (98
,w2k etc)

A.

*********** REPLY SEPARATOR  ***********

On 30/04/01 at 10:24 Brown, Andy [Infrastructure] wrote:

>Any one had any success with controlling a CM12A via VB (or C for that
>matter) ?
>
>I've tried the .ocx from www.keware.com for both the CM11A and the
CM17A
>but
>neither work.  Is the CM12A different from these other two (presumably)
>American devices?
>
>Cheers
>
>Andy
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


--- Tag-it! v2.0 (c) Andy Powell ,1998,1999,2000...and beyond..

What's another word for Thesaurus?--Steven Wright






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.