RE: Re: Line Audio over Cat5

["Kenneth Watt" <kennethwatt@xxxxxxx>]

Cool, no worries, I just gotta do it the old fashioned way for the
moment then and suffer a bit of a quality loss!

But I will use CAT5 so conversion is easy when you do get it sorted,
after using the other modules I will definitely convert t  KAT5 ASAP, is
everyone paying attention to the KAT5 sales pitch? :-)

K.

-----Original Message-----
From: Keith Doxey [mailto:ukha@xxxxxxx]=20
Sent: 27 July 2001 23:18
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Re: Line Audio over Cat5

Not fully geared up for Audio only as the only boards I have are
designed
for SCART. The modules I will be sending Phil to test will be like your
Projector modules with the connectors mounted on the panel rather than
the
PCB. Much more time consuming to build so I want to use PCB mounting
Phonos
and Minidins.

I am holding off the Phono design for a short while until I have
perfected
the IR return so that the board would have that incorporated in its
design.
I am also trying to find either connectors that will fit the current
case
(the ones I have foul the mounting pillars for the PCB) or a case of
similar
size but opposite orientation (ie the removeable panels are on the long
sides not the short ones) so that I can mount all connectors on one edge
of
the board. This will enable all the cables t  be at the rear of the unit
with a clear front panel ( possible incorporating the IR receiver). The
only
cases I can find to match the stle I want cost =A320-00 just for the blank
case which is obviously out of the question :-(

Keith

> -----Original Message-----
> From: Kenneth Watt [mailto:kennethwatt@xxxxxxx]
> Sent: 26 July 2001 18:53
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Re: Line Audio over Cat5
>
>
> Keith,
>
> Can you do audio modules yet?
>
> Just pondering DDAR plus a PC plus a sh1tload of CAT 5, couple of
> modules...
>
> K.
>
> -----Original Message-----
> From: Keith Doxey [mailto:ukha@xxxxxxx]
> Sent: 26 July 2001 13:44
> To: ukha_d
> Subject: RE: [ukha_d] Re: Line Audio over Cat5
>
> Car set will be built and sent for acceptance testing :-)
>
> Will take a couple of weeks though due t  a large pile of units
needing
> t
> be built this week.
>
> Keith
>
> -----Original Message-----
> From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> Sent: 26 July 2001 12:24
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Re: Line Audio over Cat5
>
>
>
> I've never managed more than 5m without having to be carefull where I
> lay
> single ended runs of cable ... balanced line tends t  be just drop it
> down
> and forget it.
>
> One thing I was thinking about just now (and this is for Keith really)
-
> how
> good is you're power regulation on the KAT5's? Could it handle 13.8v?
> The
> reason I ask is that I sometimes I need t  do installs in cars and
> running a
> single CAT5 cable would be far better than the four runs of triple
> screened
> that I usually use.
>
> I really could do with a set for my car anyway if they'd work as I
> already
> have induced noise there that I can't get rid of!
>
> Phil
>
> > -----Original Message-----
> > From: Dan James [mailto:UKHA@xxxxxxx]
> > Sent: 26 July 2001 11:51
> > To: ukha_d@xxxxxxx
> > Subject: [ukha_d] Re: Line Audio over Cat5
> >
> >
> > Cheers for the info
> >
> > I have looked at Keiths site and I see that its not too bad price
> > wise, so I'll add it to my shopping list.
> >
> > re: pro audio - I have managed a 30m run of Line level audio
before
> > now!! :-)
> >
> > Perhaps we should catch up soon?
> >
> > Dan
> >
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject t
> http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject t
> http://docs.yahoo.com/info/terms/
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject t
http://docs.yahoo.com/info/terms/
>
>
>




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Post message: ukha_d@xxxxxxx=20
Subscribe:  ukha_d-subscribe@xxxxxxx=20
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx=20
List owner:  ukha_d-owner@xxxxxxx=20

Your use of Yahoo! Groups is subject t
http://docs.yahoo.com/info/terms/=20

=0D
_________________________________________________________=0D
Do You Yahoo!?=0D
Get your free @yahoo.com address at http://mail.yahoo.com=0D
=0D