[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Automating the Electric Projection screen
- To: <ukha_d@xxxxxxx>
- Subject: RE: Automating the Electric Projection screen
- From: "Kenneth Watt" <kennethwatt@xxxxxxx>
- Date: Sat, 28 Jul 2001 01:11:13 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Plan:
1. Get electric screen from mate at Sevenoaks ASAP
2. Get screen fitted and power to it (Same day, natch!)
3. Get switch fitted (with above)
4. Consult Keith as to wiring (After above three are done)
As always Keith you're a star, ta for the tip!
What do I buy from Maplins as they are about a two minute walk from
Sevenoaks, dead handy that is. Apart from the fact that when going to
one I usually visit the other and that can cost serious bucks :-(
K.
-----Original Message-----
From: Keith Doxey [mailto:ukha@xxxxxxx]
Sent: 27 July 2001 22:59
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Automating the Electric Projection screen
Any device that operates using switches can have relays fitted instead
of
the switches.
Homevision or any other controller with digital output ports can control
the
relays.
Typical cost of a relay .....about 1-2 quid.
Keith
<SNIP> Getting out-of-order again!
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Home |
Main Index |
Thread Index
|