The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: OT: FAO Darren


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Splitting S-Video feed...


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Splitting S-Video feed...
  • From: "Phil Harris" <phillip.harris1@xxxxxxx>
  • Date: Tue, 24 Jul 2001 15:59:59 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Cheers Keith ...

I had wondered about this and whether it would be possible t  remove the
termination on a KAT5 but had decided to try to keep them
"standard" so that
at a later date I didn't have to remember which units had been
butchered^H^H^H^H^H^H^H^H^H^Hmodified.

Obviously if I'm now looking to pipe OnDodgy as well as DVD then the need
for a switcher is far more pressing ;->

Any more progress on the IR return dude?

Phil

> -----Original Message-----
> From: Keith Doxey [mailto:ukha@xxxxxxx]
> Sent: 24 July 2001 13:23
> To: ukha_d
> Subject: RE: [ukha_d] Splitting S-Video feed...
>
>
> How about ZERO COST!
>
> Make up a lead by cutting an S-Video lead in half.
>
> One plug goes into your DVD player, the other into your AV amp.
> Terminate BOTH the cut ends on the SCART Plug.
>
> After you have done this the units will still be double terminated but
if
> you remove the lid off the KAT5 and remove the two 75 ohm resistors
marked
> R307 & R 407 you will remove the KAT5 termiantion and it will be
looped
> through and terminated by your amp.
>
> Keith
>
> -----Original Message-----
> From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> Sent: 24 July 2001 12:16
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Splitting S-Video feed...
>
>
> Anyone know where I can find an S-Video splitter at a reasonable
> price that
> won't double terminate the line? (£200 is not a reasonable price by
the
> way!)
>
> I need to split a single S-Video output t  go t  my AV amp *AND* to a
KAT5
> feeding the TV upstairs.
>
> Cheers
>
> Phil
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/
>
>
>
>
>
>
> ____________________________________
> Automated Home UK
> http://www.automatedhome.co.uk
> ____________________________________
>
> Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/
>
>
>




____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject t  http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.