Response camera

["James Monk" <x10@xxxxxxx>]

Pedro

 

I'll let you know how to get a picture once I have figured it out, failing miserably at the moment!!!!!!!!

 

I now have another Scart connector and a different Scart to phono plug adaptor (this one has a switch on it, to control the direction of the signal). It still doesn't work!

 

A signal appears to be getting t the computer as when I turn the camera on the screen changes from a blue one to a blue one with thin haphazard horizontal line flickering around, but no picture. I've checked the camera and it is working fine when plugged int the scart socket on a television.

 

Has anyone managed to get a picture from a Response camera successfully into a wintv card, if so could they let me have an idiot's guide t how to?

 

Thanks

 

James

----- Original Message -----

From: Pedro de Oliveira

To: 'x10@xxxxxxx'

Sent: Monday, July 23, 2001 8:27 AM

Subject: RE: [ukha_d] Re: response camera -

Hi

 

I bought one of these cameras from homebase about a month ago and haven't been able t find the adapter t do exactly what you have done. Could you please tell me where you got your adapters as I am stuck with a SCART and an S-Video and no way to connect the two.

 

Cheers

 

Pedro

-----Original Message-----
From: x10@xxxxxxx [mailto:x10@xxxxxxx]
Sent: 21 July 2001 18:12
To: ukha_d@xxxxxxxSubject: [ukha_d] Re: response camera -

--- In ukha_d@y..., "Richard Lockyer" <richard.lockyer@c...> wrote:
> James,
>
> I assume that you are talking about the Hauppauge WinTV card.
> If so, right-click (you may have t hold it down for a few seconds)
> the picture window and select Ext1.
> Don't forget that if you are going from scart to phono, that
> different adapters are required for sending and receiving.
>
> Hope this helps.
>
> Richard
>
>
> --- In ukha_d@y..., x10@j... wrote:
> > Wonder if anyone can help? I'm sure this is obvious to most have
> you,
> > (having been a lurker for a few months now, I continue to be
amazed
> > at the combined knowledge, I just wish I had something to
> contribute,
> > I'm sure I will one day.....).
> >
> > As part of a Homebase clearout, I've got a response camera, I've
> been
> > out and installed a wintv card, (which picks tv channels up fine).
> >
> > I then discovered that I can't plug a scart socket int it, so
I've
> > now got an adaptor that coverts t three phono plugs (2 audio and
> one
> > video), that in turn goes into a 'composite t s-video' adaptor
> (that
> > came with wintv) and inturn int the s-video socket in the back
of
> > the wintv card.
> >
> > The problem that i have is that i can't seem to be able t get
> > anything to appear, how do i select the correct input, wintv
> software
> > happily aut scans via the tuner, but for other inputs i have to
> > enter a channel, does anyone know what channel or how to cross
this
> > last hurdel?
> >
> > thanks
> >
> > James

Thanks Darren and Richard, I've now worked out the external input on
wintv, i think the problem that i have is the scart connector, having
investigated further it doe not appear to be joining the pins
together in a like t like fashion ( it seems to be swapping the top
row to the bottom row) . I'll get another one on Monday and try again.

Thanks for the help

James






____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.

Yahoo! Groups Sponsor

____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________

Your use of Yahoo! Groups is subject t the Yahoo! Terms of Service.