The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: MS13E help


  • To: ukha_d@xxxxxxx
  • Subject: RE: MS13E help
  • From: steve.crick@xxxxxxx
  • Date: Thu, 19 Apr 2001 08:12:53 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Cool, thanks Paul.

I was sure that was the daylight sensor. Dumb ha. A few words on the help
sheet would have helped.

I got the thing working now; is it normal for it to send odd codes?

I have it set to E10; but sometimes I get both E10 and E11 when it detects
movement (this causes two macros to fire). If this is normal 'odd'
behaviour; fine. If not, I guess I will need to return it.

Steve

-----Original Message-----
From: Paul Wootton [mailto:paulw@xxxxxxx]
Sent: 18 April 2001 19:59
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] MS13E help


There's a small clear plastic 'thing' on the front that looks like an o
with
a horizontal bar on it.   You need to lever this out with a fine
screwdriver
or a pin.   There's a single crosshead screw behind it that releases the
battery cover.
-- Paul --

-----Original Message-----
From: steve.crick@xxxxxxx [mailto:steve.crick@xxxxxxx]
Sent: 18 April 2001 19:55
To: ukha_d@xxxxxxx
Subject: [ukha_d] MS13E help


Ok; So I have just received my first MS13E.

The (less than useful) instructions say 'Remove the battery cover on the
front....'

HOW ? - I have tried pushing, pulling, sliding to the point that I think
something is going to break.

Anybody out there care to let me in on the secret of removing the cover?

Thanks - Steve


****************************************************************************
**********

This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender
immediately by telephoning +44(1252) 373232. You should not copy it or
use it for any purpose nor disclose or distribute its contents to any
other person.

****************************************************************************
**********




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



---------------------------------------------------------------
Any views expressed in this message are those of the individual sender,
except where the sender specifically states them to be the views of IBNet
Plc.

This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail.  Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and
delete
this e-mail from your system.

E-mail transmission cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive late
or
incomplete, or contain viruses. The sender therefore does not accept
liability for any errors or omissions in the contents of this message which
arise as a result of e-mail transmission. If verification is required
please
request a hard-copy version.





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



**************************************************************************************

This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender
immediately by telephoning +44(1252) 373232. You should not copy it or
use it for any purpose nor disclose or distribute its contents to any
other person.

**************************************************************************************


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.