The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Motorised Curtains


  • To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
  • Subject: RE: Motorised Curtains
  • From: Eamon O'Gorman <eamonogorman@xxxxxxx>
  • Date: Sun, 17 Sep 2000 17:24:20 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

-------------------------- eGroups Sponsor -------------------------~-~>
Spend your money on the things you enjoy…NOT your bills.
Join beMANY! get LOW rates on your long distance TODAY.
Click for details.
http://click.egroups.com/1/6840/9/_/2065/_/969207172/
---------------------------------------------------------------------_->

John,

I will also soon be building a house, and am looking at curtain control
in a few rooms. The third option, which you recommend seems to be the way
to go. However I looked at your website and couldn't find info on this
particular set up.
Do you have any further info, cost etc as I would like to add this to 3-4
rooms, depending on cost etc.

Are there specific curtain rails for this, or can you use normal rails (my
wife isn't too keen on the look of those "swish rails").

In a new house, would it be relatively easy fitting these.

Regards,

Eamon

-----Original Message-----
From:	John Hammond [SMTP:john.hammond@xxxxxxx]
Sent:	Sunday, September 17, 2000 3:18 PM
To:	'ukha_d@xxxxxxx'
Subject:	RE: [ukha_d] Motorised Curtains


You have a choice.

If you use X10, you can use X10 controlled motors such as those shown on my

web site, contained within the CurtainTouch system in which case you need
only to operate them from a normal 13 amp socket with an appliance module
and require no special wiring.  Or you can use X10 operated DIN rail
modules to control them in lieu of the plug in appliance modules.  The
latter look much better.  These are then operated manually using momentary
switches which we supply.

Neither, however, would be my own preferred choice.  When we install in
quality houses, we use Silent Gliss motors which are operated normally by
momentary switches for manual control on their low voltage inputs, and via
relays from a controller such as the Comfort system (or Universal modules
if you do still want X10 control).  For this latter system we put in a 240v

fused spur to a point near the end of the curtain track (where the motor
will be).  We then put in Cat5 cable from the controller (in our case
Comfort) to exit at a similar point.  For manual control near to the
curtain use the momentary switch linked to this Cat5 cable at a normal
switch height.

I hope this is understandable?!  If not contact me direct for more info or
via our web site.

regards
John


-----Original Message-----
From:	tracey.gardner [SMTP:tracey.gardner@xxxxxxx]
Sent:	17 September 2000 12:13
To:	ukha_d@xxxxxxx
Subject:	[ukha_d] Motorised Curtains



I'm at the first fix stage in my self build and I'd like
to pre-wire for motorised curtains.

Can anybody give me some pointers about motorised curtains
such as manufacturers and any web sites etc please?

Has anybody had any experience/tips with this kind of kit
that they'd like to pass on?

Many thanks

Tracey











Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.