The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: X10 appliance module mods


  • To: ukha_d@xxxxxxx, Nigel Orr <nigel@xxxxxxx>
  • Subject: Re: X10 appliance module mods
  • From: Ian Oliver <ioliver.lists@xxxxxxx>
  • Date: Tue, 07 Nov 2000 13:45:54 GMT
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

> It needs to be momentary, normally open, 250V rated, no exposed
> metal on the outside, current no issue, nice to look at, 10mm internal
body
> diameter (or less), <30mm long (maybe 25mm max), the smaller and
shorter
> the better, and preferably under £5 in single quantity.

Farnell handy so ...

311 3565 Might be too large on diameter - 17.5mm but only 11-12mm panel
cutout
or a microswitch such as
140 690 would be OK if you use a plastic nut. Caps available.

Regards

Ian Oliver



-------------------------- eGroups Sponsor -------------------------~-~>
eGroups eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9698/3/_/2065/_/973604776/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.