[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Surge suppressors and PC power supplies
I've done some investigating, and it is the PC power supply and not the
surge surpressors that are causing the X-10 problems.
X-10 works flawlessly with the PC unplugged, but as soon as it is plugged
in, whether switched on or not X-10 starts failing.
Obviously unplugging the PC is not an option. Is there anything I can do to
isolate the power supply? The problem could be related to the fact that
both
the IR interface and CM11U are plugged into a socket about 2 feet away from
the PC. Short of running an extension lead across the floor there is not an
awful lot I can do about this.
Tim
------------------------------------------------------------------------
GET WHAT YOU DESERVE! A NextCard Platinum VISA: DOUBLE Rewards points,
NO annual fee & rates as low as 9.9% FIXED APR. Apply online today!
http://clickhere.egroups.com/click/606
eGroups.com home: http://www.egroups.com/group/ukha_d
http://www.egroups.com - Simplifying
group communications
Home |
Main Index |
Thread Index
|