The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Serial Port madness


  • To: <ukha_d@xxxxxxx>
  • Subject: Serial Port madness
  • From: "James Traynor" <James@xxxxxxx>
  • Date: Mon, 13 Dec 1999 17:48:11 -0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: listsaver-egroups-ukha_d@xxxxxxx
  • Mailing-list: contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I am trying to build my own Ha system based on a network of PICs and various other processors with a PC athe main controller,  The PC software is in Vbasic 6 using MSComm32 v6 to talk to the serial ports( OS=NT4).  For the system to work fully I need at least 8 serial ports.  This is the problem ,I bought a 8 port rs232 serial card from Chase Research but after a month of trying and talking to their technical support the card was found to be incompatible with MScomm, back to square one.  Does anyone out there have any multi port serial cards working with mscomm and vbasic??
 
Here hoping
 
 
 
James

click here
Click here!
eGroups.com Home: http://www.egroups.com/group/ukha_d
www.egroups.com - Simplifying group communications

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.