[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Audio matrix switch suggestions
- To: ukha_d@xxxxxxx
- Subject: Re: Audio matrix switch suggestions
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Fri, 30 Nov 2001 08:51:59 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
If you look at the KAT5 overview diagrams you will see that whole
house audio is part of the design. Once the AV side of the switcher
is developed and on sale I will build the Audio borads with onboard
Volume control and amplification.
Keith
--- In ukha_d@y..., "Kenneth Watt" <kennwatt@b...> wrote:
> KAT5 Switcher???
>
> Keith D., is it possible to achieve this using KAT5 modules with the
> switcher which would, more than likely, be a damn sight cheaper
that the
> likes of a Linn system!
>
> K.
>
> > -----Original Message-----
> > From: keith@f... [mailto:keith@xxxxxxx...]
> > Sent: 29 November 2001 20:41
> > To: ukha_d@y...
> > Subject: [ukha_d] Audio matrix switch suggestions
> >
> > Hi all,
> >
> > I need to be able to (remotely) switch audio signals at line
level,
> > and would ideally have 8-10 inputs and 10-12 outputs. Again
ideally,
> > this should be controllable remotely by IR, but i'm willing to
look
> > at options. Any suggestions could be pre-built products or
circuit
> > diagrams - don't mind which!!
> >
> > Cheers,
> >
> > Keith
> >
Home |
Main Index |
Thread Index
|