Re: USB module for monitoring multiple on/off switches

["Robert L Bass" <Sales@xxxxxxxxxxxxxxxxxxxxx>]

"Si Ballenger" wrote:
>
> You may want to look at using rs232 boards like below and use it
> with a USB to serial adapter. Be aware that USB boards (like
> bottom activewire) that do not apper as a serial port but instead
> use dlls and such, can require significant programming
> experiance.

This appears to be an ideal solution (or at least close to it) for a project
using a PC to monitor and control alarm sensors, sirens, etc.  The gentleman
will also need a power supply to operate motion, smoke or glass break
detectors as well as for sirens or strobes.

I don't sell this device and I have not tested it so due diligence, please.  I
do sell power supplies, alarm detectors and such in case the OP needs a source
for same.

--

Regards,
Robert L Bass

==============================>
Bass Home Electronics
DIY Alarm and Home Automation Store
http://www.bassburglaralarms.com
Sales & Service 941-870-2310
Fax 941-870-3252
==============================>