Re: IR Receiver Mini-Plug Wiring

[Lewis Gardner <lgardner@xxxxxxxxxxxxxxxxxxxxxxxxxx>]

meir410@xxxxxxxxx wrote:
> Hello,
>
> I have an IR connecting block that only accepts a 3 conductor mini
> plug and an IR receiver that has bare wires. I want to add a miniplug
> to the receiver but I don't know which wire goes to which conductor on
> the mini plug. Does anyone one know how this should be wired up? The
> receiver has the Signal, 12V+ and Ground. The mini-plug has the Tip,
> Ring, and Sleeve, of course. Which goes to which?

Normally it goes this way:

Tip = signal
Ring = Ground
Sleeve = +12VDC

See the table at the bottom of page 2:
xantech.com/products/ir_products/manual/29180.pdf