[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Converting an X-10 RF wallswitch to operate using a standard toggle switch

Subject: Re: Converting an X-10 RF wallswitch to operate using a standard toggle switch
From: Charles Sullivan <cwsulliv@xxxxxxxxxxxx>
Date: Mon, 24 Sep 2007 22:21:25 -0400
Newsgroups: comp.home.automation
References: <s7Odna8YxK9mDWrbnZ2dnUVZ_ruqnZ2d@xxxxxxx>

On Mon, 24 Sep 2007 06:26:23 -0400, Robert Green wrote:
  <snip>
> P.S. and FWIW, the instructions with this switch say that banks 9 and 13
> won't work with the RR-501 transmitter.

With the X-10 company you never know what you can believe.  Their
hardware/firmware changes without notice (sometimes dramatically)
and instruction sheets are frequently obsolete or just plain wrong
for what limited information they provide.

Regards,
Charles Sullivan

Follow-Ups:
- Re: Converting an X-10 RF wallswitch to operate using a standard toggle switch
  - From: Robert Green

References:
- Converting an X-10 RF wallswitch to operate using a standard toggle switch
  - From: Robert Green

Prev by Message: Re: Cause of some major X10 problems found
Next by Message: Re: Z-Wave Pool Thermostat with Water Temperature Sensor
Previous by thread: Converting an X-10 RF wallswitch to operate using a standard toggle switch
Next by thread: Re: Converting an X-10 RF wallswitch to operate using a standard toggle switch
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home