[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X10 Interference from the Cellet Cellphone Charger

Subject: Re: X10 Interference from the Cellet Cellphone Charger
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Sat, 29 Sep 2007 03:19:39 GMT
Newsgroups: comp.home.automation
References: <j4gLi.149589$ax1.72790@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>

"Jeff Volp" <JeffVolp@xxxxxxx> wrote:

>The XTB-IIR AGC totally rejected the noise from the unit under load, but
>occasional "1" bits were detected when the unit was unloaded.  I never saw
>the XTB-IIR respond to the noise as a valid X10 signal.  However, it is
>interesting that the ESM1 gave a solid a "Good" indication when the unit was
>under load.

The X10 Good LED only checks for 9 ones and 9 zeros so something like
1110111111111000000000 or 1110000000000111111111 might cause it to light.

Follow-Ups:
- Re: X10 Interference from the Cellet Cellphone Charger
  - From: Jeff Volp

References:
- X10 Interference from the Cellet Cellphone Charger
  - From: Jeff Volp

Prev by Message: Re: Cause of some major X10 problems found
Next by Message: Re: Napco Panel, X10 Use, HA Software - HELP!
Previous by thread: X10 Interference from the Cellet Cellphone Charger
Next by thread: Re: X10 Interference from the Cellet Cellphone Charger
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home