Re: Microphone wiring

[nobody@xxxxxxxxxxxx (Dave Houston)]

Reg <reg@xxxxxxxxxx> wrote:

>Crown PZM Series microphones
>http://www.crownaudio.com/mic_web/pzm.htm

The PZM-11LL has a built-in pre-amp (needs power) and outputs line level
audio (~1Vpp) which you can probably run over CAT5e cable depending on
distance.

If you use PZM-11, the output is a few mV and requires a two-conductor
shielded mic cable.

Either mixer can probably handle either type mic.

I suggest you tell Crown the details and ask their advice. They recommend
two-conductor shielded mic cable for both but I would try the CAT5e with
PZM-11LL mics before pulling new mic cable.

     http://www.crownaudio.com/pdf/mics/136455.pdf


http://davehouston.net
http://tech.groups.yahoo.com/group/roZetta/
roZetta-subscribe@xxxxxxxxxxxxxxx