Re: Water heater eating X-10 signal

[nobody@xxxxxxxxxxxx (Dave Houston)]

graftonfot@xxxxxxxxx wrote:

>Ooops, one other thing I meant to add:  all the measurements I made
>were performed simply by switching the new water heater's circuit
>breaker on and off.  In particular, I made no effort to determine
>whether or not the water heater was active, i.e. one or both of
>heating elements were energized and heating water.

As Jeff and I suggested earlier you need to make sure the water heater is
active when you conduct the test. Current has to be flowing through the
heating element(s).