[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X-10 RF Freq Mod

Subject: Re: X-10 RF Freq Mod
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Wed, 20 Dec 2006 01:06:26 GMT
Newsgroups: comp.home.automation
References: <omrgo25neap2803rmp6v3q4jt9m48f2jug@xxxxxxx> <45888396.382829218@xxxxxxxxxxxxx>

With Palmpads, etc. you can disable the X-10 transmitter circuit (single
transistor) and send the data signal to one of the 4-pin transmitters if you
can fit it inside the case. You can use a short flexible wire as the
antenna.

A simple way to handle multiple frequencies with roZetta will be to use an
MR26A (310MHz) and MR26E (433.92MHz) on separate serial ports. However, you
would need European versions of the palmpads and their power output is
higher than FCC (or Industry Canada) rules allow.

http://davehouston.net
http://tech.groups.yahoo.com/group/roZetta/
roZetta-subscribe@xxxxxxxxxxxxxxx

Follow-Ups:
- Re: X-10 RF Freq Mod
  - From: Just Another Joe

References:
- X-10 RF Freq Mod
  - From: Just Another Joe
- Re: X-10 RF Freq Mod
  - From: Dave Houston

Prev by Message: Re: RF receivers..
Next by Message: Re: Super simple IR Repeater
Previous by thread: Re: X-10 RF Freq Mod
Next by thread: Re: X-10 RF Freq Mod
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home