[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Ethernet-based systems for DIY?

Subject: Re: Ethernet-based systems for DIY?
From: nobody@xxxxxxxxxxxx (Dave Houston)
Date: Thu, 14 Dec 2006 22:36:07 GMT
Newsgroups: comp.home.automation
References: <1165712193.783352.104350@xxxxxxxxxxxxxxxxxxxxxxxxxxx> <NxVfh.210$_z6.152@xxxxxxxxxxxxx> <pN1gh.48$%t1.42@xxxxxxxxxxxx> <4582c3d8.53112765@xxxxxxxxxxxxx> <c1kgh.21$tq4.6@xxxxxxxxxxxx>

Peter Pearson <ppearson@xxxxxxxxxxxxxxx> wrote:

>>
>> OmniFlash...
>>
>>      http://www.jkmicro.com/
>
>A very promising lead. Thank you very much.

It doesn't have ADC but there's an SPI port (probably documented in the ARM
processor manual) and you can use one of the serial ports for RS485 so I
figure it should be easy enough to add.

http://davehouston.net
http://tech.groups.yahoo.com/group/roZetta/
roZetta-subscribe@xxxxxxxxxxxxxxx

References:
- Ethernet-based systems for DIY?
  - From: Don Stratton
- Re: Ethernet-based systems for DIY?
  - From: Tommi Herva
- Re: Ethernet-based systems for DIY?
  - From: Peter Pearson
- Re: Ethernet-based systems for DIY?
  - From: Dave Houston
- Re: Ethernet-based systems for DIY?
  - From: Peter Pearson

Prev by Message: Re: X10 signals can be TOO strong!
Next by Message: Re: X10 signals can be TOO strong!
Previous by thread: Re: Ethernet-based systems for DIY?
Next by thread: X10 and Linux
Index(es):
- Message
- Thread

comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home