Re: x10 basics--noob question

["brobin" <nospam@xxxxxxxxxxxxx>]

It would control only that fixture. Basically, you're putting the switch in
the jbox instead of at the bulb with the socket rocket.

"T.B." <balfour@xxxxxxxxxxxxxxxxxxx> wrote in message
news:11asrtobrp98ib2@xxxxxxxxxxxxxxxxxxxxx
> >
>> From what I gather, you need an inline module such as:
>>
>> http://www.smarthome.com/2251ac.html
>>
>> This could be mounted into the junction box above your current pullswitch
>> fixture. Below this, you would mount whatever standard light fixture you
>> wnat. Then to control this receiver, you need to have a transmitter
>> somewhere. X10 sells transmitters that look like wall switches. I don't
> know
>> much about them.
>>
>> Craig
>>
>>
>    if i did purchase this inline module and install it in the J Box, would
> it just control the one fixture above the sink, or could I use it in the
> future
>    to control other lights, etc?
>
>