[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Insteon Test Report



X-No-archive: yes On 29 Dec 2005 08:09:17 GMT, *com (Dan Lanciani)
used recycled pixels to say:

>In article <C6Hsf.8311$ka.7161@xxxxxxxxxxxxxxxxxxxx>, br@xxxxxxxxxxxxxxxx (BruceR) writes:
>| Of course, I was so frustrated by the other stuff that I forgot to do
>| that test.  Here are the results:
>|  I plugged one Insteon Appliance Module, one Insteon Tabletop
>| Controller, one Leviton X10 Signal Generator and one ELK ESM1 into a
>| basic powerstrip.  The Insteon module responded flawlessly to every on
>| and off command sent from the controller and the ESM1 did indeed report
>| it as noise by turning off the green light about 2 seconds after the
>| Insteon signal was sent.  I then plugged the controller into various
>| outlets around the house and it worked fine (except ,of course, from the
>| infamous bathroom).
>
>Could you repeat this test but substituting a standard X10 mini or maxi
>controller with the DIM or BRI button wedged on for the Leviton signal
>generator?
>
>				Dan Lanciani

Bruce, any chance to try the DIM or BRIGHT as requested here?



------------------------------------------------
Autobot This Spammers!
<A HREF="mailto:postmaster@[127.0.0.1]";></A>
mailto:postmaster@xxxxxxxxx
(to reply to actual address, dispense the dots before
and after sirname.


comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home