[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: X10 Phase Coupler...



The coupler can fail although that's rare. More likely you have a new
source of line noise or a signal sucker present. You can try to find the
culprit and put a filter on it or you could try upgrading the passive
coupler to an active repeater/coupler which is probably you're best bet.

From:Louis Calzada
lcalzada1@xxxxxxxxxxxxx

> Hello All,
>
> I bought a Phase Coupler about a year ago, and it solved the problem
> of missed on/off timed events... However, the same x10
> modules/switches for lighting are missing timed events again, and
> also when I press on/off buttons on the Palmpad Remote, or on my
> Firecracker interface software, the lights/switches don't respond as
> was the case before I added the Phase Coupler.  I am wondering, do
> those phase couplers burn out.  Any clue on what else might be
> causing this problem, again!
>
> Thank you!
>
> Louis




comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home