Re: Vista 20P 5800 series wireless InSaNiTy!

[RTS <gafa@xxxxxxxxxxxxx>]

On 1/16/2021 3:56 PM, Airdorn wrote:
> On Fri Jan 15 09:55:33 2021 RTS  wrote:
>> On 1/15/2021 12:34 AM, Airdorn wrote:
>>> Hello friends!
>>>
>
> [MY LONG SOB STORY DELETED FOR BREVITY]
>
>>>
>>> Airdorn
>>>
>>
>>
>>     Howdy,  Try a good ground on the vista panel box..
>> with all the new "smart" electronic gadgets in modern homes
>> RF noise imposed on the clocking of the processor might
>> cause the random actions..
>> Your odd behavior only happens "after" a legitimate signal
>> is received, "Right"?
>> Which would make me think the processor is acting normally
>> but is then hijacked by random RF noise "hacking" the clocking
>> data stream.
>> (either in the cabinet or along the wiring from receiver to panel)
>>
>> This could be hard to pin point.
>> But a RF spectrum analyzer might be able to  spot RF noise
>> sources in the immediate area..
>>
>> RTS
>>
>> --
>>
>> *Rocky T. Squirrel, esq.*
>>
>
> RTS -
>
> Good idea, I'm going to try that when I go back to the customer's house to address the problem.
>
> Thanks for your insight!
>
>
   if all your systems with problems  have a receiver outside the panel
box,  you could try torid traps on the yellow/green wires going from the
panel to receiver..
that might help with the RF on the leads..

RTS

--

*Rocky T. Squirrel, esq.*