Re: Newbe Vista-20P question

[James Gang <jamesgangnc@xxxxxxxxx>]

On Friday, June 13, 2014 3:11:02 PM UTC-4, G. Morgan wrote:
> James Gang Wrote:=20
>=20
>=20
>=20
> >Someone gave me a Vista-20p and a couple wired control panels.  No modul=
es.  I thought I'd see if I could make it work and make sense of it before =
I invested.  I've got it set up on my work bench.  It seems that the defaul=
t installer code is still good and I used the *97 to reset it to defaults. =
 I put 2k resistors across all the zone connections.  I can go into install=
er mode and look at settings.  But when I exit the installer mode it says "=
Fault 07".  I can't find anything online to explain that?
>=20
>=20
>=20
> Try another resistor by trading one from another zone.
>=20
>=20
>=20
> If that zone faults, you have an incorrect value resistor or a bad one.
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> --=20
>=20
>=20
>=20
> They who can give up essential liberty to obtain a little temporary safet=
y,
>=20
>  deserve neither liberty nor safety. - Ben Franklin

Fault 07 means zone 7?  The resistors are new.