[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Control panel recommedation for muti-tenant warehouse/office bldg?
Jim Rojas Wrote:
>On 6/13/2014 10:37 AM, G. Morgan wrote:
>> Can anyone recommend a control to use for a 24 unit office/warehouse
>> units?
>>
>> They have to be able to be armed/disarmed independently of each other. In
>> each unit there is one man door and one overhead, plus the office will
>> have 4 points/zones. I'm looking at 52 points max, or 28 if I put the
>> overheads/man doors on single zones. Preferably something addressable
>> (and available via regular distribution channels). Hopefully I can just
>> run a data cable through the building instead of many cables and zone
>> expanders.
>>
>> I thought about using a Vista 128 with V-Plex, but that does not solve
>> the independent arm/disarm problem. I could always manually shunt the
>> sensors with mechanical keypads at each unit, but that may be problematic
>> too for several reasons.
>>
>> I know they make something specifically for this scenario, I just have
>> never had to do one. Thanks.
>>
>
>3 Honeywell 128BPT panels will give you 24 partitions. Stay away from
>the Vplex stuff. You should be able to do it all wireless with a few
>well placed repeaters. Ademco also makes fully wireless keypads that can
>also be powered by a small transformer.
I just talked to the salesman, he's going to get 25 V-10's and monitoring
for each!
--
They who can give up essential liberty to obtain a little temporary safety,
deserve neither liberty nor safety. - Ben Franklin
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home