Re: Control panel recommedation for muti-tenant warehouse/office bldg?

[Jim Rojas <jrojas@xxxxxxxxxxxx>]

On 6/13/2014 4:08 PM, G. Morgan wrote:
> Jim Rojas Wrote:
>
>> On 6/13/2014 10:37 AM, G. Morgan wrote:
>>> Can anyone recommend a control to use for a 24 unit office/warehouse
>>> units?
>>>
>>> They have to be able to be armed/disarmed independently of each other. In
>>> each unit there is one man door and one overhead, plus the office will
>>> have 4 points/zones.  I'm looking at 52 points max, or 28 if I put the
>>> overheads/man doors on single zones.  Preferably something addressable
>>> (and available via regular distribution channels).  Hopefully I can just
>>> run a data cable through the building instead of many cables and zone
>>> expanders.
>>>
>>> I thought about using a Vista 128 with V-Plex, but that does not solve
>>> the independent arm/disarm problem.  I could always manually shunt the
>>> sensors with mechanical keypads at each unit, but that may be problematic
>>> too for several reasons.
>>>
>>> I know they make something specifically for this scenario, I just have
>>> never had to do one.  Thanks.
>>>
>>
>> 3 Honeywell 128BPT panels will give you 24 partitions. Stay away from
>> the Vplex stuff. You should be able to do it all wireless with a few
>> well placed repeaters. Ademco also makes fully wireless keypads that can
>> also be powered by a small transformer.
>
>
> I just talked to the salesman, he's going to get 25 V-10's and monitoring
> for each!
>
>

That's great. So do you still plan to hardwire it all?

--
Jim Rojas
Technical Manuals Online!
http://www.tech-man.com
8002 Cornwall Lane
Tampa, FL 33615-4604
813-884-6335
813-440-6653 Fax
Email: jrojas@xxxxxxxxxxxx
AOL: rojas813
MSN: jimrojas@xxxxxxxxxxx
Yahoo: jimrojas
ICQ: 20116219
GoogleTalk: Rojas813@xxxxxxxxx