Re: Kidde "Badger" Universal Control Head

["ABLE1" <nospamhere@xxxxxxxxxxx>]

RTS,

I just googled "Badger 60 Universal Control Head"  and found a lot of
pictures and install of the unit.  But nothing with wires.  Are you sure of
the model number??   Or is this a add on component to the control valve??

My suggestion would be to remove the cover and find the micro switch and see
what wire is connected to what terminal.  Normally the terminal ID is on the
Micro cover at the terminal.  Remove the Micro and manipulate as needed to
determine what is going on.

Good Luck

Les



"RTS" <gafa_usa@xxxxxxxxxxx> wrote in message
news:Wd-dnR9D7q8B05jOnZ2dnUVZ_oidnZ2d@xxxxxxxxxxxx
Looking for a little help  with wire output..
Been tasked with the hookup of a Badger 60 Universal Control Head  (Cook
Hood Suppression system)
to a local Fire Alarm Panel..
(alarm when the hood system is activated)

UCH  has 6 wires showing,  Yellow, Yellow/stripe, Blue, Blue/stripe, Brown
and Brown/stripe..

No 2 wires of the set has a continuity  short..

Does this unit support connection of a dry contact closure?
If so,  which color pair of wires would accomplish this connection?

This is a fairly new installation but the installers didn't leave any paper
work behind for the owners records..
I've been unable to get any help from the manufacturer or their website..

Many Thanks for those that can help with this problem..

RTS

---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com