Re: Vista 20 not dialing out

[NickMark <nmarkowitz@xxxxxxxxx>]

On Saturday, June 15, 2013 6:12:01 PM UTC-4, John Sowden wrote:
> I am reprogramming an Ademco Vista 20 (not a P or SE).  I have not
>
> defaulted the control.
>
> I have programmed in the phone number, format (7-contact id), account
>
> code (0123), placed 10 in the first pair of boxes in the *56 zone
>
> programming section for each zone.
>
>
>
> Problem: when the system is tripped (Keypad * + #), hard wire zone panic
>
> (type 06) or a burg zone, the system does not send a signal.  With a
>
> telco handset placed on the brown/gray telco pair I get dial tone
>
> immediate after tripping the panics (no delay).  This means no line
>
> seizure.  Telco handset on red/green gives me dial tone (no attempt to
>
> dial).  Of course no signal or call at the CS.
>
>
>
> Help?

I do not think vista 20 can do contact id  thats you problem it only came out in 20SE  panels  need to use 4/2  high speed ademco