Re: Looking for a Low Cost On Delay Timer

["Bob La Londe" <none@xxxxxxxxxx>]

Check the specs of an Altronix 6060



"Guv Bob" <guvbob2003@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DLudnc9wmoYfZonPnZ2dnUVZ_uydnZ2d@xxxxxxxxxxxxxxxx
> Names can be confusing, so here's what I'm doing....
>
> http://img43.imageshack.us/img43/7434/wvm.gif
>
> When 12VDC is applied to the input, I need a 12VDC output for 5 seconds.
> Then output will go back off and stay off until the input goes to zero.
> Then cycle starts again.
>
> Current for both legs is in the 10-50ma range.
>
> A simple on-delay timer would work but I'm having trouble finding one with
> NC contacts.  Tons of stuff $100+, but for this application, it has to be
> under $20.
>
> Thanks,
>
>
> Bob
>
>