[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Weird panel dump

Subject: Re: Weird panel dump
From: G. Morgan <usenet_abuse@xxxxxxxxx>
Date: Wed, 03 Nov 2010 03:09:05 -0500
Newsgroups: alt.security.alarms
References: <981947a1-cac4-4b4b-b354-989bf59d1ebe@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

nick markowitz <nmarkowitz@xxxxxxxxx> wrote:

>Got a trans-mix facility with an older FCI releasing panel  where for
>some reason the unit activated for no apparent reason checked all
>heats etc wiring  which as replaced couple years ago. Can find no
>reason for it luckily it was only water  covering a butane tank but
>this one got me stumped any one else ever have this happen.

That panel is setup for cross-zone detection before the release, right?

Follow-Ups:
- Re: Weird panel dump
  - From: nick markowitz

References:
- Weird panel dump
  - From: nick markowitz

Prev by Message: Re: Help with adding two window sensors to ADT alarm.
Next by Message: Re: Weird panel dump
Previous by thread: Re: Weird panel dump
Next by thread: Re: Weird panel dump
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home