[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Problem with Scantronic avenger VI

Subject: Re: Problem with Scantronic avenger VI
From: nick markowitz <nmarkowitz@xxxxxxxxx>
Date: Fri, 27 Aug 2010 17:09:38 -0700 (PDT)
Newsgroups: alt.security.alarms
References: <6bc58113-f621-4cbe-b8c1-328cdfac6c89@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <c418057f-5d14-4527-9157-664d9f5fbb15@xxxxxxxxxxxxxxxxxxxxxxxxxxx>

On Aug 27, 7:14=A0pm, Euh <Euh...@xxxxxxxxxxx> wrote:
> Ok so I got a brand new battery and replaced the old one.
>
> When i did the switch, the system didnt even react...weird!
>
> Should I let it charge for a bit before testing it ?

You should totally power down panel  then power up ac then hook up
battery to let it do a complete reboot and clear out any troubles.
once electronics start acting up like computers it better to turn them
off and start from scratch to allow the micro processors to reboot.

Follow-Ups:
- Re: Problem with Scantronic avenger VI
  - From: Euh

References:
- Problem with Scantronic avenger VI
  - From: Euh
- Re: Problem with Scantronic avenger VI
  - From: Euh

Prev by Message: Re: Problem with Scantronic avenger VI
Next by Message: here we go again with merger fever this time DOD and HSA
Previous by thread: Re: Problem with Scantronic avenger VI
Next by thread: Re: Problem with Scantronic avenger VI
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home